Best 3D Pens for Kids 

When looking for a good 3D pen for kids, what you should consider the most is the safety of the pen. The best 3D pens for kids don’t heat up a lot. Therefore, their nozzles don’t present as a burning hazard.

In this review, there are still 3D pens that need parental monitoring, mainly due to the danger presented by the nozzles. The pens have been organized from the most expensive to the cheapest. If you’d rather go straight to comparing the prices and the features, click our comprehensive comparison table.

This pen comes in variety of vibrant colors and uses photopolymer resins as the writing medium. The pen addresses the issue of safety of kids due to the presence of UV light. It features an automatic LED light shut off, which takes effect when the pen is tilted to a specific angle. This is important since curious kids might sometimes want to look at the tip of the pen. It would be dangerous (eye damage) if the UV light was shone on their eyes.

The special photopolymer ink reacts to light in the visible light spectrum (which includes UV) and is heated with very low temperatures. This eliminates the risk of children getting burned by accidentally touching the nozzle since the nozzle does not get heated.

Moreover, the warming up of this ink doesn’t produce unpleasant smells, something that is a huge concern with ABS or PLA 3D pens. Although you will not be able to print using either ABS or PLA material with this pen, the photopolymer ink makes the pen safe for use by kids. The ink also comes with fun colors for unlimited fun.

Features

  • Cordless and therefore can be used wirelessly
  • Uses the cool ink technology (photopolymer) which comes in a variety of colors (aromatic, glow-in-the-dark, and others)
  • No heated nozzle which makes it safe for children
  • Has a speed control button

Check Price of Polyes Q1 3D Pen at Amazon

This is one of the high-end 3D pens on Amazon that is ideal for children. The pen has a simplistic design and is easy to use.

CreoPop 3D Pen has one operation button and uses the ‘cool ink’ technology (photopolymer) that makes designs made from it solidify very fast. This technology uses LED light, which is extruded at the nozzle tip of the 3D pen where the printing ink is ejected from.

The variety of inks that can be used with this pen range from elastic ink, temperature ink, magnetic ink and even glow in the dark ink. The amount of ink in each cartridge can allow for about 5ft of 3D drawing.

Because the pen uses photopolymer material instaed of thermoplastic material, which is used by most pens, it can operate on battery power alone. It does not require a large amount of heat to melt the writing media. This pen can also be used wirelessly.

However, with the CreoPop 3D pen, you will be limited to using resin ink since ABS and PLA cannot be used.

RELATED: Best 3D Pens for Experts

Features

  • Has a rechargeable battery and a USB port that you can use in charging the battery from a USB cable
  • Uses photopolymer technology (cool ink) which comes in a variety of colors, including glow in the dark
  • Has a sleek appearance
  • Can be used wirelessly
  • The nozzle does not heat up to unsafe temperatures and can therefore be safely used by children
  • The simplistic design (only one operation button) makes it very easy to use.

Check Price of CreoPop 3D Pen at Amazon

3Doodler, the original inventors of 3D pens, have yet again mesmerized the world with another invention: a 3D pen for kids.

The 3Doodler Start pen is specially made for children. This pen uses a specially-developed biodegradable plastic filament that has a lower melting point than ABS or PLA. Therefore, you can touch and mold the molten plastic with your hands without risking any burns. The nozzle is also safe since it doesn’t get heated up.

The 3Doodler Start pen is user friendly and has a simplistic design that makes it easy to use. The child 3D pen has one nozzle temperature setting and one extrusion speed pre-set on the pen. Other features of the pen include an LED indicator that alerts you when the battery is charging and when ready for use, a micro USB port for charging and for plugged in operation, and an on/off switch. A single button is on the body for turning  the extruder on or off. Double clicking the button reverses the extruder.

3Doodler also provides 3D printing stencils. It you need some creativity, check the fun stencil projects on 3Doodler Start. These inspirational ideas can start you off on your 3D printing project. If you need 3Doodler Start for educational use, you can buy the product in bundles.

Features

  • Relatively easy to use.
  • Has one pre-set temperature mode
  • Has an LED indicator
  • Uses FDM technology (a special low temperature biodegradable filament)
  • Is wireless and hence portable
  • You can use it either when plugged in an electric source or wirelessly
  • Ideal for use by children since the nozzle does not become extremely hot
  • Takes a short time to heat up (Up to 1 minute.)
  • On/off switch

Check Price of 3Dooler Start at Amazon

The AtmosFlare 3D Pen uses a photopolymer resin that is solidified by UV light. The resin’s extrusion is not automated and therefore, you have to squeeze the ink cartridge to eject it to start drawing.

This pen features one AA battery that can last up to four hours of continuous use, four different nozzles, and two refillable ink cartridges. Although the battery is not rechargeable, it lasts long.

The pen uses UV light. Therefore, you should use a dark surface when doing your printing to avoid reflection of the UV light on a white surface, as the rays can be dangerous to the eyes. Also, the reflected UV light may cause ink to clog the nozzle.

Features

  • It uses photopolymer technology (cool ink that is solidified by UV light)
  • Uses AA batteries which can last for 4 hours on continuous use
  • You should guide your children when they are using the pen
  • This pen is affordable (check price at Amazon)

Check Price of AtmosFlare 3D at Amazon

The Tech 4 Kids magic Imagi Pen is specially designed for kids. The pen uses liquid polymers, commonly known as “cool ink”, which hardens immediately when exposed to UV light. However, it takes a while to harden without UV light.

The pen’s nozzle has LED nodes, which almost instantly cure the ink liquid passing through it.  This pen also uses 3 AAA batteries instead of the power adapter. It is therefore portable and won’t confine your child to use it in a specific location. The pen is safe as the nozzle does not present a burning hazard.

You will, however, have to purchase the batteries separately as they are not included in the pen.

Features 

  • Cordless
  • Affordable (check price)
  • 3 AAA Batteries (can last for 4 hours on continuous use)
  • Photopolymer technology
  • Parental guidance is still advised for kids because of the UV light

       Check Price of Tech 4 Kids Magic Imagi Pen at Amazon

Leave a Reply